On Wednesday 16 February 2005 17:10, Gene Johnson wrote: > should be two little threaded studs with the leads held down by two nuts > each. the top one acting as a locknut. you can test it with an ohm meter. > when the shutter opens all the way it will close the contact and the > resistance between the two wires should go from infinity to almost zero. Some thing must be broken. I've got to set up a lensboard adapter system and see about tightening up the tripod mount. I'll leave the flash sync for later. Thanks Nick ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.