Re: [MoAccess] Motif ES USB not working
- From: "Damon Fibraio" <dfibraio@xxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Sun, 9 Sep 2007 17:27:36 -0400
Rod, to my knowledge, no. You should be able to just send. On all channels
in a port. Maybe try reinstalling the driver, or do a reset on the motif?
--
Damon Fibraio
screen names -- aol: dfibraio...msn dfibraio@xxxxxxxxxxxx skype: dfibraio
web sites: personal music site: http://www.keyboardguy.com. band:
http://www.queenoftheryche.com. Internet Radio station:
http://www.nhbradio.com
Internet radio show every Wednesday night from 8 to 11 pm eastern
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Rod Alcidonis
Sent: Sunday, September 09, 2007 1:21 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Motif ES USB not working
Damon:
Thanks for the info. I have done all that, though. I am quite shock as to
why only one port is working when I have done the same for all of the other
ports. That's why I hate configuring these things after a fresh install.
May I possibly have to mess with some menus to tell the keyboard to send on
all ports? Anyone know how to do that please if this may be the case?
Rod Alcidonis
Juris Doctor Candidate, 2009.
Roger Williams University School of Law
10 Metacom Ave., Box: 9003
Bristol, RI 02809
Cell: 718-704-4651
Home: 01-824-8685
Roddj12@xxxxxxxxxxx
----- Original Message -----
From: Damon Fibraio <mailto:dfibraio@xxxxxxxxxxx>
To: MoAccess@xxxxxxxxxxxxx
Sent: Sunday, September 09, 2007 12:56 PM
Subject: Re: [MoAccess] Motif ES USB not working
OK, did you select the motif as in and out? You have to assign the midi
instrument definition to the midi port, too. Also, make sure your midi
channels are correct and put the motif into song or pattern mode.
--
Damon Fibraio
screen names -- aol: dfibraio...msn dfibraio@xxxxxxxxxxxx skype: dfibraio
web sites: personal music site: http://www.keyboardguy.com. band:
http://www.queenoftheryche.com. Internet Radio station:
http://www.nhbradio.com
Internet radio show every Wednesday night from 8 to 11 pm eastern
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Rod Alcidonis
Sent: Sunday, September 09, 2007 12:07 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Motif ES USB not working
Hello guys:
I have downloaded the USB driver for the motif es, installed it, but I am
getting no sound. I have also followed the instructions to activate the USB
on the Motif es, but to no avail.
The Midi activity is being shown on my taskbar.
I have also installed and configured my Instrument definition for the Motif
es.
I noticed that in the midi devices dialog box, there is only one option to
select the motif es8. As for input, it appears that it only goes to motif
1-4. Could it be that I am not receiving input sound? I was under the
assumption that by selecting the motif es only, as the only option given, it
would work for both input and output.
Please help; I desperately want to get this fix!
Thanks.
Rod Alcidonis
Juris Doctor Candidate, 2009.
Roger Williams University School of Law
10 Metacom Ave., Box: 9003
Bristol, RI 02809
Cell: 718-704-4651
Home: 01-824-8685
Roddj12@xxxxxxxxxxx
Other related posts:
