Re: Jaws 10 and RealSpeak Solo direct voices
- From: Yardbird <yardbird@xxxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sun, 30 Nov 2008 21:49:24 -0800
Jerry,
Ah, so it's an executable file! I didn't realize that. The rest I understand
perfectly. Why don't they say this somewhere, I mean why don't they explain
what you just did? I can't find this instruction anywhere! Well, thanks. I
assume it'll work, of course.
From: "G.W. Cox" <gwcox2@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Sunday, November 30, 2008 9:29 PM
Subject: Re: Jaws 10 and RealSpeak Solo direct voices
You download the voices to a file of your choice, such as "downloads." Then
run the downloaded file. When it is finished, it will say you need to
restart your computer for the voice to work. That can be a little slow if
your doing a lot of voices, so you might want to escape out of that option
until you're ready to restart. When you do an insert control S, you'll see
an option for RealSpeak Solo.
----- Original Message -----
From: "Yardbird" <yardbird@xxxxxxxxxxxxxx>
To: "JFW List" <jfw@xxxxxxxxxxxxx>
Sent: Sunday, November 30, 2008 10:18 PM
Subject: Jaws 10 and RealSpeak Solo direct voices
> First off, let me say that I've been looking at every book and topic under
> Jaws Help, and have also been to the FS page with the selection of new
> RealSpeak voices. Even so, I still need to ask these questions. Thanks.
>
> I'm using Jaws 10. I'd like to install one or more voices from the
> RealSpeak
> Solo Direct page at the FS site, but I don't understand what I'm supposed
> to
> do.
>
> When I click on the FTP link for a voice, I get a common download
> dialogue.
> Fine. First of all, do I want to run or save? if it's Run, what happens?
> And
> if it's Save I want, then in which folder of my hard drive should I place
> it
> ?
>
> And then, how do I actually install it and get it working?
>
> I used to use Jaws 9, and I installed the old RealSpeak voices from the
> Jaws
> 9 CD, and they all appeared in my Say All item on the Configuration
> Manager
> Settings menu, and I knew how to get a voice working as the default Say
> All
> voice or, if I preferred, to set it up so that if I pressed Alt key Insert
> down arrow instead of the regular Say All command, the voice would kick
> in.
> So I have that experience. But I can't figure out how to install one or
> more
> of the new voices. this.
>
> I hope my question is clear. Thanks for any assistance.
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
