What is the advantage of this alternative to eloquence and the voices. I think that two of them are the same as the ones available on the Victor Stream Reader. It's the only thing that I don't like about it. Tom and Samantha sound like they are choking. -----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Roger Levine Sent: Monday, December 01, 2008 2:13 AM To: jfw@xxxxxxxxxxxxx Subject: Re: Jaws 10 and RealSpeak Solo direct voices Hi, You do not need to save the FT download , just run it and you will be prompted to hit the install button and the module will go to the right place within the FS Folder. The FS Daisy Basic Training is very helpful with this topic. Roger ----- Original Message ----- From: "Yardbird" <yardbird@xxxxxxxxxxxxxx> To: "JFW List" <jfw@xxxxxxxxxxxxx> Sent: Sunday, November 30, 2008 9:18 PM Subject: Jaws 10 and RealSpeak Solo direct voices > First off, let me say that I've been looking at every book and topic under > Jaws Help, and have also been to the FS page with the selection of new > RealSpeak voices. Even so, I still need to ask these questions. Thanks. > > I'm using Jaws 10. I'd like to install one or more voices from the > RealSpeak > Solo Direct page at the FS site, but I don't understand what I'm supposed > to > do. > > When I click on the FTP link for a voice, I get a common download > dialogue. > Fine. First of all, do I want to run or save? if it's Run, what happens? > And > if it's Save I want, then in which folder of my hard drive should I place > it > ? > > And then, how do I actually install it and get it working? > > I used to use Jaws 9, and I installed the old RealSpeak voices from the > Jaws > 9 CD, and they all appeared in my Say All item on the Configuration > Manager > Settings menu, and I knew how to get a voice working as the default Say > All > voice or, if I preferred, to set it up so that if I pressed Alt key Insert > down arrow instead of the regular Say All command, the voice would kick > in. > So I have that experience. But I can't figure out how to install one or > more > of the new voices. this. > > I hope my question is clear. Thanks for any assistance. > > -- > JFW related links: > JFW homepage: http://www.freedomscientific.com/ > Scripting mailing list: > http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com > JFW List instructions: > To post a message to the list, send it to jfw@xxxxxxxxxxxxx > To unsubscribe from this mailing list, send a message to > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. > Archives located at: //www.freelists.org/archives/jfw > > If you have any concerns about the list, post received from the list, or > the way the list is being run, do not post them to the list. Rather > contact the list owner at jfw-admins@xxxxxxxxxxxxxx -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx