Re: Jaws 10 and RealSpeak Solo direct voices
- From: "Bruce Toews on an Unspecified Input Device" <Bruce@xxxxxxxx>
- To: jfw@xxxxxxxxxxxxx
- Date: Mon, 01 Dec 2008 14:43:57 -0600
With the Realspeak Direct voices, wherever you choose your synthesizer,
you will see Realspeak listed as a synthesizer, if you so choose. They
don't recommend using Realspeak as your primary synthesizer, that's not
what it's meant for, but the option exists if you so wish.
Bruce
On Mon, 1 Dec 2008 12:08:24 -0800, "Yardbird" <yardbird@xxxxxxxxxxxxxx>
said:
> Alison,
>
> I'm not sure what you mean. The way we used the earlier RealSpeak voices
> was
> that they would appear only in the Say All menu of Configuration Manager.
> Not in the voice dialogues of Options. I suppose as a choice for one of
> your
> regular voices? I don't want it for that. Just want to be able to invoke
> it
> myself for Say All if I happen to feel like it. I hope that's still
> possible. Again, not trying to put it into my Options/Voices menus, so I
> hope that isn't the only place it winds up.
> ----- Original Message -----
> From: "Allison Mervis" <allisonfm@xxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Monday, December 01, 2008 10:26 AM
> Subject: Re: Jaws 10 and RealSpeak Solo direct voices
>
>
> The file you're downloading is a typical install file. Save it wherever
> you'd like, and when you run it, the installer will insure that the voice
> is
> installed in the correct directory. You'll have to restart jaws before
> the
> voice can be used, but then you can use it in the voice adjustment
> dialogs
> under the voices submenu.
> Allison
> ----- Original Message -----
> From: "Yardbird" <yardbird@xxxxxxxxxxxxxx>
> To: "JFW List" <jfw@xxxxxxxxxxxxx>
> Sent: Monday, December 01, 2008 12:18 AM
> Subject: Jaws 10 and RealSpeak Solo direct voices
>
>
> > First off, let me say that I've been looking at every book and topic under
> > Jaws Help, and have also been to the FS page with the selection of new
> > RealSpeak voices. Even so, I still need to ask these questions. Thanks.
> >
> > I'm using Jaws 10. I'd like to install one or more voices from the
> > RealSpeak
> > Solo Direct page at the FS site, but I don't understand what I'm supposed
> > to
> > do.
> >
> > When I click on the FTP link for a voice, I get a common download
> > dialogue.
> > Fine. First of all, do I want to run or save? if it's Run, what happens?
> > And
> > if it's Save I want, then in which folder of my hard drive should I place
> > it
> > ?
> >
> > And then, how do I actually install it and get it working?
> >
> > I used to use Jaws 9, and I installed the old RealSpeak voices from the
> > Jaws
> > 9 CD, and they all appeared in my Say All item on the Configuration
> > Manager
> > Settings menu, and I knew how to get a voice working as the default Say
> > All
> > voice or, if I preferred, to set it up so that if I pressed Alt key Insert
> > down arrow instead of the regular Say All command, the voice would kick
> > in.
> > So I have that experience. But I can't figure out how to install one or
> > more
> > of the new voices. this.
> >
> > I hope my question is clear. Thanks for any assistance.
> >
> > --
> > JFW related links:
> > JFW homepage: http://www.freedomscientific.com/
> > Scripting mailing list:
> > http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> > JFW List instructions:
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the list, or
> > the way the list is being run, do not post them to the list. Rather
> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >
> > __________ Information from ESET NOD32 Antivirus, version of virus
> > signature database 3654 (20081201) __________
> >
> > The message was checked by ESET NOD32 Antivirus.
> >
> > http://www.eset.com
> >
> >
> >
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the
> way the list is being run, do not post them to the list. Rather contact
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
Bruce Toews
dogriver@xxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
