[talks-uk] Re: Mini GPS
- From: "Peter" <Peter@xxxxxxxxxxxxxxxxxxxxxxxx>
- To: <talks-uk@xxxxxxxxxxxxx>
- Date: Sat, 4 Mar 2006 22:15:05 -0500
Hi Clive,
Many thanks,
As to your question. I don't think you can add more than one name per cell.
The only way I can see that happening is if the GPS is refreshing and in the
meantime you have opted to name the cell. Because as you might have heard,
the mini gps can refresh a number of times if you are on the borderline of a
cell. This is what I have found anyway. So if you are, and I only assume
this might be the case, if you are on the border of one cell and you name
it, say, home, then it changes, and you call it near home, It might be that
you have just named a neighbouring cell. Really, I don't believe you can
name the same cell twice. If you could do that, it would make a mockery of
the whole thing.
I'm only a beginner with this thing, so I really don't know that much. But
that is just my guess. On looking at my list of cells, and I know I made a
few on the way home, I can only find one. That one is called ... home. The
others will be there, I'm sure, but they will probably only show themselves
when I start my travels.
I'm just amazed at this talks thing. I can't seem to put my phone down. And
the calander. Can anyone tell me one thing. Will birthday's be remembered
year after year?
Peter
From beautiful Helensburgh on the Firth of Clyde.
MSN:peter_paul_logue@xxxxxxxxxxx
Website:
http://www.sightconnections.com/radio/scotland.htm
-----Original Message-----
From: talks-uk-bounce@xxxxxxxxxxxxx [mailto:talks-uk-bounce@xxxxxxxxxxxxx]
On Behalf Of Clive Pallett
Sent: 04 March 2006 14:21
To: talks-uk@xxxxxxxxxxxxx
Subject: [talks-uk] Re: Mini GPS
Hello Peter,
Go to the second tab sheet, where you set up events you wish to be
triggered. If there are none set up, you will hear the message "no
events". Go into options and you will hear the following : Add Event,
settings, about, send application (this has a submenu), add to goto
and exit. Select add event and you will be presented with two tab
sheets, settings and timings. In the settings tab sheet you must
select the event to be active and choose from entering or leaving
location. the timings tab sheet allows you to specify when and on
what days(s) you wish the event to be carried out.
By the way, how did you enter new cells? I tried this and was asked
to enter the area id, whatever that is. I left it at 0 and entered
the name, and when I tried the same with another cell I was told there
was already one in the database. Can you enter more than one cell
from a set location or do you need to be at that location to enter the
cell name?
Best wishes,
Clive Pallett
Other related posts:
