[talks-uk] Re: Mini GPS
- From: "Clive Pallett" <clive@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <talks-uk@xxxxxxxxxxxxx>
- Date: Sat, 4 Mar 2006 19:20:45 -0000
Hello Peter,
Go to the second tab sheet, where you set up events you wish to be
triggered. If there are none set up, you will hear the message "no
events". Go into options and you will hear the following : Add Event,
settings, about, send application (this has a submenu), add to goto
and exit. Select add event and you will be presented with two tab
sheets, settings and timings. In the settings tab sheet you must
select the event to be active and choose from entering or leaving
location. the timings tab sheet allows you to specify when and on
what days(s) you wish the event to be carried out.
By the way, how did you enter new cells? I tried this and was asked
to enter the area id, whatever that is. I left it at 0 and entered
the name, and when I tried the same with another cell I was told there
was already one in the database. Can you enter more than one cell
from a set location or do you need to be at that location to enter the
cell name?
Best wishes,
Clive Pallett
Other related posts: