You have to enable File and Printer Sharing, share & designate at least one blank folder in each computer (you can put a bogus file in there if you wish), add Netbeui protocol to your Network settings. And also make sure that you designate the Printer as being shared and that each computer join the same (as it is spelled exactly in each computer) workgroup. Tom LeStrange <toml77@xxxxxxx> wrote: I am trying to connect my two computers together and am not having any luck. One computer is XP and the other is W98. I installed an Ethernet card in each computer and connected them with an CAT5e crossover cable. I ran the Network wizard on the XP computer and created a disk to use in the W98 computer. I want to use the XP computer to connect to the net and be able to share the printers that are connected to the XP computer with the W98 computer. When I open My Network Places I cannot see the other computer. Neither can I see the XP computer from the W98 computer. The lights on the Ethernet cards are active. What am I missing? Has anyone accomplished these with any success? Thanks for any replies. Tom ================================== To Unsubscribe, set digest or vacation mode or view archives use the below link. http://thethin.net/winxplist.cfm ================================== To Unsubscribe, set digest or vacation mode or view archives use the below link. http://thethin.net/winxplist.cfm Everyone is invited to join a self-help computer solutions group "My Computer Headaches" by going to http://groups.yahoo.com/group/mycomputerheadaches/. How-to tutorials, tech links and tech newz will be posted there regularly. Let's learn from each other. Post any computer problems you are having there. Geeks, tech gurus, techies, newbies, technoids and everyone are all welcome, except spammers. OTs or non-tech postings are permitted. However, anything illegal will not be allowed. --------------------------------- Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now ================================== To Unsubscribe, set digest or vacation mode or view archives use the below link. http://thethin.net/winxplist.cfm