[amayausers] Re: thead breaks
- From: "Lee or Terri Hoover" <lhoover2@xxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 7 Jul 2005 12:49:42 -0500
Lou,
When you said you replaced the whole hook assembly, could you explain in
more detail what you did?
Thanks,
Terri
_____
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of IHSpecial@xxxxxxx
Sent: Thursday, July 07, 2005 12:40 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: thead breaks
I didn't take into account how many stitches I had on my machine. I
purchased my Amaya almost 2 years ago and I believe it had an older style
hook assembly. From reading the boards, I understood that Melco had changed
the style. I ordered a new one but kept it on hand; was a little skeptical
of changing it myself. Then I had a problem where a needle bent and broke
off a piece of the hook. I didn't have a choice so I had to install the new
one and was SOOOOO glad I did. The machine runs smoother now. I'm sure some
of the techies on this board can tell you the difference, I'm not an expert.
I just know the difference now verses then. Lou
Lou Frazier, President
In House Specialties, Inc.
109 SE 1st Street, PO Box 1093
Pinetops, NC 27864
(252) 827-5480
(252) 827-4033 fax
pad printing, screen printing & embroidery professionals
Other related posts:
