[amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks

  • From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
  • To: <amayausers@xxxxxxxxxxxxx>
  • Date: Wed, 4 Jan 2006 10:04:56 -0800

Thanks Mr. Ed.
All back to normal here!

Hope things in LA way get
that way soon also!

Ron Vinyard
Body Cover Design
1-888-435-0176
  ----- Original Message ----- 
  From: Ed Orantes 
  To: amayausers@xxxxxxxxxxxxx 
  Sent: Wednesday, January 04, 2006 10:11 AM
  Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks


  HANG IN THERE ROD!!!  
  and, 
  HOPE YOU AND THE KIDS ARE BETTER TOO, RON!

  Mister Ed
    -----Original Message-----
    From: amayausers-bounce@xxxxxxxxxxxxx 
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Rod or Sharon
    Sent: Monday, January 02, 2006 10:06 PM
    To: amayausers@xxxxxxxxxxxxx
    Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks



        -OK Russell, I will get Rod in here to the computer as soon as I can 
and see if he has any words of wisdom to help you. (He is sick--actually just 
has a really rotten cold).
        Sharon

        ---- Original Message ----- 
        From: Russell Silva 
        To: amayausers@xxxxxxxxxxxxx 
        Sent: Monday, January 02, 2006 9:06 PM
        Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks


        Hi Sharon,

            Yes I replaced the entire new kit and no I am not running auto, I 
have not received the OS upgrade yet.

        Russell
          ----- Original Message ----- 
          From: Rod or Sharon 
          To: amayausers@xxxxxxxxxxxxx 
          Sent: Monday, January 02, 2006 6:51 PM
          Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks


            Hi Russell,
            Did you replace the entire new kit and are you using "auto"?  I 
will get Rod to answer after I hear back... 
            Sharon
              ----- Original Message ----- 
              From: Russell Silva 
              To: Amayausers 
              Sent: Monday, January 02, 2006 4:48 PM
              Subject: [amayausers] Upgraded Feed Rollers, Lots of thread breaks


              Hi All,

                  I just upgraded to the new yellow thread feed rollers and now 
I am getting allot of thread breaks, the directions said to go up on the MT but 
when I do the thread dances around too much in front of the name plate, the 
design I was design I was working on is normally set at 4, I have tried going 
all the way down to 2 and had the same problem. When the thread breaks there is 
usually a popping sound, I checked the hook timing but that seems to be ok, 
also new needles. Does anyone have any ideas of what might be going on?

              Thanks in advance
              Russell Silva
              R. S. Embroidery
              508-222-4433

Other related posts:

  1. Home
  2. amayausers
  3. Archive
  4. 01-2006