[amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks

  • From: "Ed Orantes" <e3m@xxxxxxx>
  • To: <amayausers@xxxxxxxxxxxxx>
  • Date: Wed, 4 Jan 2006 14:38:55 -0600

Things in LA you say...
    You are not going to believe what I heard on the news last night.  There
is now a bus company selling tickets at $35 bucks a pop giving tours of the
devastated areas.  Talk about a tourist attraction.  It's okay though,...
$3 dollars of every ticket is going to a hurricane fund that will probably
be corrupted by some political figure at some point in time.
 Sorry, maybe I'm biased.

Ed
  -----Original Message-----
  From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Body Cover
  Sent: Wednesday, January 04, 2006 12:05 PM
  To: amayausers@xxxxxxxxxxxxx
  Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks


  Thanks Mr. Ed.
  All back to normal here!

  Hope things in LA way get
  that way soon also!

  Ron Vinyard
  Body Cover Design
  1-888-435-0176
    ----- Original Message -----
    From: Ed Orantes
    To: amayausers@xxxxxxxxxxxxx
    Sent: Wednesday, January 04, 2006 10:11 AM
    Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks


    HANG IN THERE ROD!!!
    and,
    HOPE YOU AND THE KIDS ARE BETTER TOO, RON!

    Mister Ed
      -----Original Message-----
      From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Rod or Sharon
      Sent: Monday, January 02, 2006 10:06 PM
      To: amayausers@xxxxxxxxxxxxx
      Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks



          -OK Russell, I will get Rod in here to the computer as soon as I
can and see if he has any words of wisdom to help you. (He is sick--actually
just has a really rotten cold).
          Sharon

          ---- Original Message -----
          From: Russell Silva
          To: amayausers@xxxxxxxxxxxxx
          Sent: Monday, January 02, 2006 9:06 PM
          Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread
breaks


          Hi Sharon,

              Yes I replaced the entire new kit and no I am not running
auto, I have not received the OS upgrade yet.

          Russell
            ----- Original Message -----
            From: Rod or Sharon
            To: amayausers@xxxxxxxxxxxxx
            Sent: Monday, January 02, 2006 6:51 PM
            Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread
breaks


              Hi Russell,
              Did you replace the entire new kit and are you using "auto"?
I will get Rod to answer after I hear back...
              Sharon
                ----- Original Message -----
                From: Russell Silva
                To: Amayausers
                Sent: Monday, January 02, 2006 4:48 PM
                Subject: [amayausers] Upgraded Feed Rollers, Lots of thread
breaks


                Hi All,

                    I just upgraded to the new yellow thread feed rollers
and now I am getting allot of thread breaks, the directions said to go up on
the MT but when I do the thread dances around too much in front of the name
plate, the design I was design I was working on is normally set at 4, I have
tried going all the way down to 2 and had the same problem. When the thread
breaks there is usually a popping sound, I checked the hook timing but that
seems to be ok, also new needles. Does anyone have any ideas of what might
be going on?

                Thanks in advance
                Russell Silva
                R. S. Embroidery
                508-222-4433

Other related posts:

  1. Home
  2. amayausers
  3. Archive
  4. 01-2006