[amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks

  • From: "Ed Orantes" <e3m@xxxxxxx>
  • To: <amayausers@xxxxxxxxxxxxx>
  • Date: Wed, 4 Jan 2006 12:11:36 -0600

HANG IN THERE ROD!!!
and,
HOPE YOU AND THE KIDS ARE BETTER TOO, RON!

Mister Ed
  -----Original Message-----
  From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Rod or Sharon
  Sent: Monday, January 02, 2006 10:06 PM
  To: amayausers@xxxxxxxxxxxxx
  Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks



      -OK Russell, I will get Rod in here to the computer as soon as I can
and see if he has any words of wisdom to help you. (He is sick--actually
just has a really rotten cold).
      Sharon

      ---- Original Message -----
      From: Russell Silva
      To: amayausers@xxxxxxxxxxxxx
      Sent: Monday, January 02, 2006 9:06 PM
      Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread breaks


      Hi Sharon,

          Yes I replaced the entire new kit and no I am not running auto, I
have not received the OS upgrade yet.

      Russell
        ----- Original Message -----
        From: Rod or Sharon
        To: amayausers@xxxxxxxxxxxxx
        Sent: Monday, January 02, 2006 6:51 PM
        Subject: [amayausers] Re: Upgraded Feed Rollers, Lots of thread
breaks


          Hi Russell,
          Did you replace the entire new kit and are you using "auto"?  I
will get Rod to answer after I hear back...
          Sharon
            ----- Original Message -----
            From: Russell Silva
            To: Amayausers
            Sent: Monday, January 02, 2006 4:48 PM
            Subject: [amayausers] Upgraded Feed Rollers, Lots of thread
breaks


            Hi All,

                I just upgraded to the new yellow thread feed rollers and
now I am getting allot of thread breaks, the directions said to go up on the
MT but when I do the thread dances around too much in front of the name
plate, the design I was design I was working on is normally set at 4, I have
tried going all the way down to 2 and had the same problem. When the thread
breaks there is usually a popping sound, I checked the hook timing but that
seems to be ok, also new needles. Does anyone have any ideas of what might
be going on?

            Thanks in advance
            Russell Silva
            R. S. Embroidery
            508-222-4433

Other related posts:

  1. Home
  2. amayausers
  3. Archive
  4. 01-2006