[amayausers] Re: Caps problems
- From: "HK Acree" <hkacree@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 6 Apr 2006 10:16:20 -0700
Peter,
Check the 4,000,000 stitch service.
Herb
Royal Embroidery
----- Original Message -----
From: "Peter Strike" <strikesystems@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, April 06, 2006 10:07 AM
Subject: [amayausers] Re: Caps problems
> Hi Rod,
> Question about your question:
> "Have the red pinch rollers and the thread feed rollers been taken out
> and the rotating hubs and hub axles been greased?"
>
> As I parused the maintenance section of my Amaya manual, the rotating
> hubs and hub axel greasing didn't seem to be in the scheduled
> maintenance. Did I overlook this? I am not having threadbreak issues
> with caps, but I just want to know more about the stuff that I can't
> find printed in black and white. I couldn't find mention of them in
> the Index in the manual either. So I don't even know what to look for.
>
> Any more info appreciated,
> thanks ,
> Peter
> --- Rod or Sharon <springer37@xxxxxxxxxxxx> wrote:
>
>> Darlene,
>> How much sewing has been done on this machine? John is right. A year,
>> I
>> second the , Wow!! I have yet to see a machine not have problems that
>> had
>> extended wear on the thread feed rollers, and yours, if you have been
>> doing
>> any real sewing at all, are past the extended wear definition.
>>
>> Small cuts , grooves, wax build up, can and will give you some
>> serious
>> thread break issues.
>>
>> What about lubrication? Have the red pinch rollers and the thread
>> feed
>> rollers been taken out and the rotating hubs and hub axles been
>> greased? How
>> long since the needle bars and reciprocater have been oiled? All
>> these items
>> can cause grief with thread breaks if not stayed on top of.......
>>
>> Rod Springer
>>
>> Embroidery Cottage
>> Rod & Sharon Springer
>> Melco Amaya Tech & Trainer
>> Design Shop Pro+ Digitizing
>>
>> Boise, ID 83713
>> 208-938-3038
>>
>>
>> ----- Original Message -----
>> From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>> To: <amayausers@xxxxxxxxxxxxx>
>> Sent: Wednesday, April 05, 2006 8:28 PM
>> Subject: [amayausers] Re: Caps problems
>>
>>
>> > Darlene:
>> >
>> > A year? Wow. I had small cuts in mine about 3 months in. Try
>> changing
>> > the rollers. Takes about 5 minutes. Can't hurt to eliminate that
>> - and
>> > they probably should be changed anyway.
>> > Only takes a few tiny cuts to screw things up. Have you taken them
>> out
>> > and looked at them (not just while they are on the machine)?
>> >
>> > - - - - - - - -
>> > John Yaglenski
>> > President / Chief Executive Officer
>> > Levelbest Communications
>> >
>> > I: www.levelbest.com
>> > P: 301.591.2481 / 888.229.1779
>> > F: 501-631-4544
>> >
>> > ---------- Original Message ----------------------------------
>> > From: Darlene Weber <image_maker31@xxxxxxxxx>
>> > Reply-To: amayausers@xxxxxxxxxxxxx
>> > Date: Wed, 5 Apr 2006 19:19:46 -0700 (PDT)
>> >
>> >>The htread rollers are the sam e since I have had the machine. I
>> have had
>> >>the machine for about a year. They don't appear to have much wear
>> on
>> >>them.
>> >>
>> >> I had just changed the needle before I started these hats and
>> have
>> >> changed it already again.
>> >>Cheryl Rotter <tsiemb@xxxxxxxxxxxxx> wrote:
>> >> Darlene,
>> >>How old are your thread rollers, breaks may be caused by the age or
>> >>cleanliness of your roller. Also, change the needle often make sure
>> it's
>> >>a sharp. Good luck
>> >>
>> >>Cheryl Rotter
>> >>Team Sports Ink
>> >>5111 Grumann Dr. Ste #1B
>> >>Carson City, NV 89706
>> >>775-884-3550
>> >>
>> >>
>> >>-----Original Message-----
>> >>From: amayausers-bounce@xxxxxxxxxxxxx
>> >>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Darlene Weber
>> >>Sent: Tuesday, April 04, 2006 7:44 PM
>> >>To: Amaya
>> >>Subject: [amayausers] Caps problems
>> >>
>> >>I am trying to stitch a logo on a brushed cotton hat which I have
>> doen
>> >>several other times and am averaging about 6 thread breaks every
>> hat.
>> >>The logo was digitized by the best company I have used for 2 years
>> and
>> >>it seems to always break in the seam area. What are some of the
>> >>settings you all use when having this problem on your Amaya??
>> >>
>> >>Thanks!
>> >>Darlene
>> >>
>> >>---------------------------------
>> >>How low will we go? Check out Yahoo! Messenger's low PC-to-Phone
>> call
>> >>rates.
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>---------------------------------
>> >>New Yahoo! Messenger with Voice. Call regular phones from your PC
>> and save
>> >>big.
>> >>
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >
>> > ________________________________________________________________
>> > Sent via the WebMail system at mail.levelbest.com
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>
>
Other related posts:
