[amayausers] Re: Caps problems
- From: "HK Acree" <hkacree@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 5 Apr 2006 21:41:40 -0700
Darlene,
If you have had your machine for a year and are still using the black
rollers that would be my first guess. If you have not upgraded to the new
rollers, please, please, please do it yesterday. "IF" you are still using
the black rollers, change it.
Herb
----- Original Message -----
From: "Darlene Weber" <image_maker31@xxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, April 05, 2006 7:19 PM
Subject: [amayausers] Re: Caps problems
> The htread rollers are the sam e since I have had the machine. I have had
> the machine for about a year. They don't appear to have much wear on
> them.
>
> I had just changed the needle before I started these hats and have
> changed it already again.
> Cheryl Rotter <tsiemb@xxxxxxxxxxxxx> wrote:
> Darlene,
> How old are your thread rollers, breaks may be caused by the age or
> cleanliness of your roller. Also, change the needle often make sure it's
> a sharp. Good luck
>
> Cheryl Rotter
> Team Sports Ink
> 5111 Grumann Dr. Ste #1B
> Carson City, NV 89706
> 775-884-3550
>
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Darlene Weber
> Sent: Tuesday, April 04, 2006 7:44 PM
> To: Amaya
> Subject: [amayausers] Caps problems
>
> I am trying to stitch a logo on a brushed cotton hat which I have doen
> several other times and am averaging about 6 thread breaks every hat.
> The logo was digitized by the best company I have used for 2 years and
> it seems to always break in the seam area. What are some of the
> settings you all use when having this problem on your Amaya??
>
> Thanks!
> Darlene
>
> ---------------------------------
> How low will we go? Check out Yahoo! Messenger's low PC-to-Phone call
> rates.
>
>
>
>
>
>
> ---------------------------------
> New Yahoo! Messenger with Voice. Call regular phones from your PC and save
> big.
>
>
Other related posts:
