----- Original Message ----- From: "Sauerwald Mark" <mark_sauerwald@xxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx> Sent: Friday, November 09, 2007 5:13 AM Subject: [pure-silver] Re: what is a "work print"?
Its just the effect of the digital age:-) I also use the Ilford meter. It allows exact, or at least very close, duplication of exposure when print size is changed and also gives one a good starting exposure without the use of test strips. Since the meter must be used in "a shadow area which is to have detail" there is some visual judgement needed in using it but the learning process is not difficult. The dial is in arbitrary units but can be calibrated in stops using the iris of the enlarging lens or neutral density filters. This allows using the meter over a wider range of light levels and also allows making rough contrast measurements. I don't know the current price of the meter but they were around $30 US, they are probably more now but will still be cheap. The meter was originally intended for Ciba/Ilfochrome printing.I mistyped when I said 'Epson' - it is the Ilford enlarging meter that I use. It has a sensor, a knob and three LEDs, a red 'over' led, a red 'under' led and a green just right. I pick a neutral part of the image - usually a face if it is a portrait, put the meter on the easel and turn the knob until I get the green LED. Raise the head, then open the aperture until the Green LED comes back. At this point the intensity of light on the easel is the same as it was for the 8x10, and all my times should be the same.
--- Richard Knoppow Los Angeles, CA, USAdickburk@xxxxxxxxxxxxx
============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.