[pure-silver] Re: Speedotron 2401A

Mine never have...

 Please check my website: http://www.bobkiss.com/

"Live as if you are going to die tomorrow.  Learn as if you are going to
live forever".  Mahatma Gandhi

-----Original Message-----
From: pure-silver-bounce@xxxxxxxxxxxxx
[mailto:pure-silver-bounce@xxxxxxxxxxxxx]On Behalf Of Nick Zentena
Sent: Monday, October 02, 2006 9:47 AM
To: pure-silver@xxxxxxxxxxxxx
Subject: [pure-silver] Re: Speedotron 2401A

On Monday 02 October 2006 09:23, BOB KISS wrote:
> My Speedo 2401A packs have a "bleeder" resistor that is put across the
> banks of capacitors when you switch the power off.  This is supposed to
> discharge the caps over a period of seconds as soon as you switch off.
> Ergo, IF the bleeder resistor is working properly you don't have to dump
> the flash just before turning off and the caps will discharge even if you
> don't have any heads plugged in and dump the power.

  Does this mean the 2401A doesn't flash the lights when you turn it off?
The
way the current packs do.

        Nick
============================================================================
=================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.


=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: