[pure-silver] Re: Speedotron 2401A
- From: Nick Zentena <zentena@xxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Mon, 2 Oct 2006 06:48:47 -0400
On Sunday 01 October 2006 18:22, Bob Randall wrote:
>
> I'm late to the discussion so forgive me if this is out of line, but I've
> used Speedotron since 1969 and I've never heard of a need to form the
> capacitors. The pack can be turned off and stored for 20 years and the
> minute you turn it on it's good to go.
"Do not immediately fire the unit on the first use or when the unit has
been
idle for periods over 3 weeks. Allow several minutes for the power supplyâs
capacitors to form. Once this procedure has been followed at these
times, subsequent use of the power supply requires no waiting period."
That's from the current manual. I'm not sure when the pack I'm getting
was
last used but I figure better safe then sorry. So I'd like to leave it on for
a while before firing.
Nick
============================================================================================================To
unsubscribe from this list, go to www.freelists.org and logon to your account
(the same e-mail address and password you set-up when you subscribed,) and
unsubscribe from there.
Other related posts:
