[pure-silver] Re: Speedotron 2401A
- From: Nick Zentena <zentena@xxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Mon, 2 Oct 2006 09:51:30 -0400
On Monday 02 October 2006 07:26, Ralph W. Lambrecht wrote:
> Nick
>
> I can't find anything in the instructions about that. I've never done it.
> But the instructions are talking about dangerous arc-over if light units
> are changed without turning the power off first. It also talks about
> discharge and recommends to turn the power to full before turning the power
> off to allow the system to discharge the capacitor(s).
The way I was thinking was the pack dumps the power by flashing the
lights
when it's turned off. What the Speedotron manual recommends not doing is
flashing the lights and then turning them off. All I can think is they start
charging again and that is what causes the problems.
Nick
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
