Re: [MoAccess] Vocoder feature not working.
- From: "Bryan Smart" <bryansmart@xxxxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Fri, 21 Sep 2007 22:53:18 -0400
The fourth setting down on the F2 screen (from top left) *should* kill
the mic when you change it. It is sending the mic somewhere else. The
setting for the insert block is the last item in that list: spin the
data dial all the way to the right.
Unfortunately, I won't be around an XS for another week, so can't work
this out right now.
Bryan
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Reeves
Sent: Friday, September 21, 2007 3:21 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Vocoder feature not working.
The forth setting down on the f2 screen kills my mic and the main
outputs somehow. It still doesn't work. When I exit out of utility mode,
it seems like the whole board is muted. I have to go back in and set it
back. The f4 screen scrolls through some different effects. Not sure
where I'm going wrong.
Other related posts:
