[MoAccess] mix editor for the motif es 76
- From: <fioresq1@xxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Sat, 22 Sep 2007 00:39:54 -0400
Hi: I finally installed the demo of the mix editor with the motif es 76. I
am using the usb drivers from yamaha and jaws 6.1. When I open the program
the tab key isn't reading the column headings, Sometimes it will read part
of the column it won't read the mix parts general columns Do I need special
scripts for jaws to run the editor? Thanks John Fioravanti
----- Original Message -----
From: Bryan Smart <bryansmart@xxxxxxxxxxxxxx>
To: <MoAccess@xxxxxxxxxxxxx>
Sent: Friday, September 21, 2007 10:53 PM
Subject: Re: [MoAccess] Vocoder feature not working.
The fourth setting down on the F2 screen (from top left) *should* kill
the mic when you change it. It is sending the mic somewhere else. The
setting for the insert block is the last item in that list: spin the
data dial all the way to the right.
Unfortunately, I won't be around an XS for another week, so can't work
this out right now.
Bryan
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Reeves
Sent: Friday, September 21, 2007 3:21 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Vocoder feature not working.
The forth setting down on the f2 screen kills my mic and the main
outputs somehow. It still doesn't work. When I exit out of utility mode,
it seems like the whole board is muted. I have to go back in and set it
back. The f4 screen scrolls through some different effects. Not sure
where I'm going wrong.
Other related posts:
- » [MoAccess] mix editor for the motif es 76
