Re: [MoAccess] Vocoder feature not working.
- From: "Bryan Smart" <bryansmart@xxxxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Fri, 21 Sep 2007 07:36:18 -0400
This is basically how it works, however you've left out one important
step.
Normally, the A/D input is routed directly to the main mix. In order to
hear the vocoder, you have to send the A/D input to the effects block.
I'm sitting in an airport terminal right now, so don't have an XS to
check, but I think that the setting that you need is in Utility mode,
F4, and is the fourth one down from the top left. If you turn this all
the way to the left, then that sends the A/D part to the main mix. As
you click the data dial to the right, you'll hear the mic input cut out
from the mix. These settings let you route the A/D input to the aux
jacks, different mLAN channels in mono and stereo, etc. What you want,
though, is to spend the knob all the way to the end of the list. Once
you do that, the vocoder presets should work as you expected.
By the way, don't forget to use the assignable knobs and assignable
function buttons. The knobs, in particular, will tweka how the vocoder
presets sound (shift formant, etc).
The editors are a big help for building vocoder presets...well, at least
the synth part. I don't think that the public version has editing
support for the vocoder parameters yet. All of the effects are covered
in the editors except for the vocoder. It will be in there shortly.
Bryan
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Reeves
Sent: Friday, September 21, 2007 3:00 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Vocoder feature not working.
Check it. I was under the impression that when you called up a voice
like funky vocoder in voice mode, you just plugged in the mic and it
worked. I have ran my cables from my mixer and can hear dry audio coming
into the keyboard. However, no vocoder. I hear silence when I press the
keys. I've looked in the manual, but it is giving instructions on how to
set up a vocoder from scratch. I just want to play the factory default.
Any thoughts? THanks so much.
Other related posts:
