In article <E86CD904-83E9-45FE-BDCF-80E323A4166C@xxxxxxxxxx>, John Ballance <jwb@xxxxxxxxxx> wrote: > If you do *ekinfo, what does it show? I'll check next time. Last night the whole machine froze, so I had to reset and *ekinfo now doesn't show anything out of the ordinary: EtherK device driver for Intel PRO/1000 network controllers, version 0.21 DCI Version 4.05 Supported network cards detected: 1 Unit 0 (location: Motherboard) Ethernet address 00:09:95:00:11:08 Link is up; 1000 Mbps Full Duplex Controller mode: Multicast, reject frames with errors Frame types claimed: Ethernet 0800 (multicast) handler=(FC2EC67C,FB407504) Ethernet 0806 (normal) handler=(FC2EC67C,FB407504) Ethernet 8035 (normal) handler=(FC2EC67C,FB407504) Hardware statistics summary: TX frames 2,008 : RX frames 6,166 TX bytes 151,872 : RX bytes 2,347,910 TX errors 0 : RX errors 0 Driver statistics (only non-zero statistics are reported): Frames received: 6,166 Unwanted frames: 30 Regards, Frank --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx