[PCB_FORUM] Re: possessed design!

  • From: "Andy Krawiecki" <andy.krawiecki@xxxxxxxxxxxxxx>
  • To: <icu-pcb-forum@xxxxxxxxxxxxx>
  • Date: Thu, 17 May 2007 08:22:05 -0700

Just this freelists forum...

 

 Andy

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Thursday, May 17, 2007 11:05 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

 

 

Dave,

 

Just icu-pcb-forum@xxxxxxxxxxxxxx

 

Gary

  

Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado

amd.com

gary.macindoe@xxxxxxx

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Thursday, May 17, 2007 8:04 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

 

Just curious...

I noticed that the number of emails on this forum has 
been picking up lately.

Are folks subscribed to both Allegro forums?
icu-pcb-forum@xxxxxxxxxxxxx and cdnusers.org

or 

Do folks prefer one forum over the other?

Looking for general comments. Personal Interest.

Dave


gnieski_mike@xxxxxxx wrote:

    Hit the nail on the head! This worked great.....I did have multiple
shapes and could only see the problem shape with boundary on. 

    This forum is always the first place to go when there's a problem.
Great help! 

 

    Mike

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [
mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Edwards, Kevin
Sent: Wednesday, May 16, 2007 4:23 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

Yup, just go to Drawing Options and click on the box to the left of
where it says Out of Date Shapes.  It will bring up a list, scroll down
and find the ones that are out of date and click the coordinates to
bring you to the exact location (it will tell you the layer it is on).
You may need to turn on the "Boundary" for that etch layer to see it due
to the shape priority (sometimes there are multiple shapes but only one
is visible.

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [
mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of 
gnieski_mike@xxxxxxx
Sent: Wednesday, May 16, 2007 1:12 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

 

any easy way to find an out of date shape?

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [
mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Edwards, Kevin
Sent: Wednesday, May 16, 2007 4:04 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

Go into the "Drawing Options" and make sure they are all green.
Sometimes you have out of date shapes that prevent it from being up to
date.

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [
mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Wednesday, May 16, 2007 12:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] possessed design!

 

Hey guys,

 

Allegro 610 Expert, Windows XP Pro.

 

Well, my design has become "possessed"!

 

No matter what I do, the Status shows DRC errors as "Out Of Date" with 0
errors:

 

- I ran Tools -> Database Check (both checked), passed squeaky clean.

 

- I ran Tools -> Update DRC, resulting in "No DRC errors detected".

 

- I ran "Update DRC" from Drawing Options window, Status tab, also
resulting in "No DRC errors detected".

 

- I got out of Allegro, got back in, then I repeated the above.

 

Anyone ever see this one?  In all my years using this tool, I've never
seen the DRC errors stay "Out Of Date" after updating.

 

Thanks for any help!

 

Gary

 

-- 
Dave Seymour, CID+
Catapult Communications Inc.
800 Perimeter Park Dr, Suite A
Morrisville, NC 27560
 
Direct: (919)653-4249
Main: (919)653-4180
Fax: (919)653-4297
 
Dave.seymour@xxxxxxxxxxxx
 

GIF image

Other related posts: