[PCB_FORUM] Re: possessed design!

  • From: gnieski_mike@xxxxxxx
  • To: <icu-pcb-forum@xxxxxxxxxxxxx>
  • Date: Wed, 16 May 2007 16:11:55 -0400

any easy way to find an out of date shape?
 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Edwards, Kevin
Sent: Wednesday, May 16, 2007 4:04 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!



Go into the "Drawing Options" and make sure they are all green.
Sometimes you have out of date shapes that prevent it from being up to
date.

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Wednesday, May 16, 2007 12:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] possessed design!

 

Hey guys,

 

Allegro 610 Expert, Windows XP Pro.

 

Well, my design has become "possessed"!

 

No matter what I do, the Status shows DRC errors as "Out Of Date" with 0
errors:

 

- I ran Tools -> Database Check (both checked), passed squeaky clean.

 

- I ran Tools -> Update DRC, resulting in "No DRC errors detected".

 

- I ran "Update DRC" from Drawing Options window, Status tab, also
resulting in "No DRC errors detected".

 

- I got out of Allegro, got back in, then I repeated the above.

 

Anyone ever see this one?  In all my years using this tool, I've never
seen the DRC errors stay "Out Of Date" after updating.

 

Thanks for any help!

 

Gary

 

  

Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado

amd.com

gary.macindoe@xxxxxxx

 

GIF image

Other related posts: