[PCB_FORUM] Re: possessed design!
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 16 May 2007 16:07:21 -0500
Sorry to waste your time Jean, it was an out of date shape.
Once the shape was up to date, the DRC check would be up to date.
Gary
Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado
amd.com
gary.macindoe@xxxxxxx
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jean Bratton
Sent: Wednesday, May 16, 2007 1:57 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!
Are your shapes set to smooth?
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Wednesday, May 16, 2007 3:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] possessed design!
Hey guys,
Allegro 610 Expert, Windows XP Pro.
Well, my design has become "possessed"!
No matter what I do, the Status shows DRC errors as "Out Of Date" with 0
errors:
- I ran Tools -> Database Check (both checked), passed squeaky clean.
- I ran Tools -> Update DRC, resulting in "No DRC errors detected".
- I ran "Update DRC" from Drawing Options window, Status tab, also
resulting in "No DRC errors detected".
- I got out of Allegro, got back in, then I repeated the above.
Anyone ever see this one? In all my years using this tool, I've never
seen the DRC errors stay "Out Of Date" after updating.
Thanks for any help!
Gary
Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado
amd.com
gary.macindoe@xxxxxxx
This correspondence and any attachments are considered confidential. If
you are not the intended recipient, please notify Freedom CAD Services,
Inc. immediately by either replying to this message or by sending an
email to operations@xxxxxxxxxxxxxx; please destroy all copies of this
message and any attachments. Thank you.
Other related posts:
