[PCB_FORUM] Re: possessed design!

I only post on Freelist.  I do look at the other one, but I obtain most of the info off of the freelist.

---

From: "Andy Krawiecki" <andy.krawiecki@xxxxxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Subject: [PCB_FORUM] Re: possessed design!
Date: Thu, 17 May 2007 08:22:05 -0700

Just this freelists forum…

 

 Andy

 

 

---

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Thursday, May 17, 2007 11:05 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

 

 

Dave,

 

Just icu-pcb-forum@xxxxxxxxxxxxxx

 

Gary

 

Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado

amd.com

gary.macindoe@xxxxxxx

---

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Thursday, May 17, 2007 8:04 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

 

Just curious...

I noticed that the number of emails on this forum has
been picking up lately.

Are folks subscribed to both Allegro forums?
icu-pcb-forum@xxxxxxxxxxxxx and cdnusers.org

or

Do folks prefer one forum over the other?

Looking for general comments. Personal Interest.

Dave


gnieski_mike@xxxxxxx wrote:

    Hit the nail on the head! This worked great.....I did have multiple shapes and could only see the problem shape with boundary on.

    This forum is always the first place to go when there's a problem. Great help!

 

    Mike

 

 

---

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Edwards, Kevin
Sent: Wednesday, May 16, 2007 4:23 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

Yup, just go to Drawing Options and click on the box to the left of where it says Out of Date Shapes.  It will bring up a list, scroll down and find the ones that are out of date and click the coordinates to bring you to the exact location (it will tell you the layer it is on).  You may need to turn on the “Boundary” for that etch layer to see it due to the shape priority (sometimes there are multiple shapes but only one is visible.

 

---

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of gnieski_mike@xxxxxxx
Sent: Wednesday, May 16, 2007 1:12 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

 

any easy way to find an out of date shape?

 

 

---

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Edwards, Kevin
Sent: Wednesday, May 16, 2007 4:04 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: possessed design!

Go into the “Drawing Options” and make sure they are all green.  Sometimes you have out of date shapes that prevent it from being up to date.

 

---

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Wednesday, May 16, 2007 12:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] possessed design!

 

Hey guys,

 

Allegro 610 Expert, Windows XP Pro.

 

Well, my design has become “possessed”!

 

No matter what I do, the Status shows DRC errors as “Out Of Date” with 0 errors:

 

- I ran Tools -> Database Check (both checked), passed squeaky clean.

 

- I ran Tools -> Update DRC, resulting in “No DRC errors detected”.

 

- I ran “Update DRC” from Drawing Options window, Status tab, also resulting in “No DRC errors detected”.

 

- I got out of Allegro, got back in, then I repeated the above.

 

Anyone ever see this one?  In all my years using this tool, I’ve never seen the DRC errors stay “Out Of Date” after updating.

 

Thanks for any help!

 

Gary

 

-- 

Dave 
Seymour, CID+

Catapult Communications 
Inc.

800 Perimeter Park Dr, 
Suite A

Morrisville, NC 27560

Direct: 
(919)653-4249

Main: 
(919)653-4180

Fax: (919)653-4297

Dave.seymour@xxxxxxxxxxxx

This correspondence and any attachments are considered confidential. If you are not the intended recipient, please notify Freedom CAD Services, Inc. immediately by either replying to this message or by sending an email to operations@xxxxxxxxxxxxxx; please destroy all copies of this message and any attachments. Thank you.
><< image001.gif >>

All trademarks and copyrights within the FreeLists archives are owned by their respective owners. Everything else ©2000-2009 Avenir Technologies, LLC. FreeLists is a service of Avenir Technologies, LLC.