[PCB_FORUM] Re: Removing unused pad rings on inner layers DURING design...
- From: "Austin Franklin" <austin@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 31 Mar 2005 16:00:43 -0500
Hi Jim,
> Do you really need a 24 mil via? I've routed several 1mm on a standard
> 63 mil thick board and use 19 mil via pads with a 6 mil finished drill.
With a 10 mil drill, yes. This is the technology that has to be used, and
again, it will work, so there should be no need to go to another more
expensive technology just to work around an issue that the tool should be
able to better handle.
Regards,
Austin
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
