[PCB_FORUM] Removing unused pad rings on inner layers DURING design...

Hi,

Is there a way to not have inner layer pad rings show up unless a trace is
connected to it on that specific layer?  I know that the pad rings can be
removed by the fabricator, but I want to remove them during design to allow
for more clearance for routing between vias.  How I've handled this in
another tool is to set-up custom padstacks that have pad rings only on the
two outer layers, and the one internal layer.  It worked fine, but obviously
required more work when picking vias.

Regards,

Austin


-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: