Hi David,
> So long as there is a pad defined the size of the drill then the clearance
> will be as if drill to copper. Even works without any pad, or at
> least used
> to.
I think you may be right that no inner layer pad is required, as there is
via to trace clearance...but I'm not sure what, exactly, it means by "via",
whether it is just the pad, or in absence of a pad, could be the drill. I
guess we'll just have to find out.
Regards,
Austin
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------