[PCB_FORUM] Re: Relative prop delay

Hi Gerry,

Well, keep in mind, I've gotten XNETs to work in Performance ;-)

Were you basing what you said on some documentation or experience?  If so,
I'd like to know more.

Regards,

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Gerry Meier
> Sent: Wednesday, April 18, 2007 2:00 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Relative prop delay
>
>
> Austin,
>
> Good luck - Let me know if you get it to work and get Constraint Manager
> to actually calculate it.
>
>
> Gerry
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Wednesday, April 18, 2007 11:58 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Relative prop delay
>
> Hi Gerry,
>
> > Pin delays can only be used in "Allegro Expert" and can be imported
> > with a .CSV file.
>
> I have Performance, and when I use "Edit Property" and select a pin, one
> of
> the available properties is "Pin_Delay", and it lets me add it.  This
> would
> lead me to believe it works in Performance as well.
>
> Regards,
>
> Austin
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: