[PCB_FORUM] Re: Relative prop delay
- From: sjchar3@xxxxxxxxxxxx
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 18 Apr 2007 16:17:51 -0400
group: someone brought up the issue of letting the sch do the driving. We have
allegro basis and allegro SI. While doing a ECO orcad automatically opens up
Allegro basic, can I redirect this so SI will open as the default tool from
orcad?Thanks Sam
-----Original Message-----
From: gerry.meier@xxxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Wed, 18 Apr 2007 11:34 AM
Subject: [PCB_FORUM] Re: Relative prop delay
Austin,
I have used Pin-delays on multiple boards in V15.5 and up. The import
pin delay is only available in Expert. The option to use is only
available in Expert. Running db doctor or analyze in Performance changes
all the values so they are "Red" in CM, DRC count soars.
I have not tried adding them in as pin properties in Performance.
Regards,
Gerry
Note: It seems that some functionality is being removed from
Performance. You used to be able to modify ecsets in Performance. Now
you have to be in Expert to even change a value in the spreadsheet. You
also can no longer audit ecsets in performance.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Wednesday, April 18, 2007 1:19 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Relative prop delay
Hi Gerry,
Well, keep in mind, I've gotten XNETs to work in Performance ;-)
Were you basing what you said on some documentation or experience? If
so,
I'd like to know more.
Regards,
Austin
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Gerry Meier
> Sent: Wednesday, April 18, 2007 2:00 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Relative prop delay
>
>
> Austin,
>
> Good luck - Let me know if you get it to work and get Constraint
Manager
> to actually calculate it.
>
>
> Gerry
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
Franklin
> Sent: Wednesday, April 18, 2007 11:58 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Relative prop delay
>
> Hi Gerry,
>
> > Pin delays can only be used in "Allegro Expert" and can be imported
> > with a .CSV file.
>
> I have Performance, and when I use "Edit Property" and select a pin,
one
> of
> the available properties is "Pin_Delay", and it lets me add it. This
> would
> lead me to believe it works in Performance as well.
>
> Regards,
>
> Austin
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
________________________________________________________________________
Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam
and email virus protection.
Other related posts:
