[PCB_FORUM] Re: Relative prop delay

Hi Gerry,

The datasheet you attached says:

"Real-time DRC of Delay and Crosstalk Rules         PCB Performance
x"

Which leads me to believe the Delay is available in Performance.  I'm not
saying it works, but the datasheet leads me to believe it does.

I hate when something I purchased and purchased subsequent maintenance for,
gives me less than I paid for in the sense of removing features I already
paid for.  I'm not sure how "ethical" that is for companies to do things
like that.

Regards,

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Gerry Meier
> Sent: Wednesday, April 18, 2007 2:34 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Relative prop delay
>
>
> Austin,
>
> I have used Pin-delays on multiple boards in V15.5 and up. The import
> pin delay is only available in Expert. The option to use is only
> available in Expert. Running db doctor or analyze in Performance changes
> all the values so they are "Red" in CM, DRC count soars.
>
> I have not tried adding them in as pin properties in Performance.
>
> Regards,
> Gerry
>
> Note: It seems that some functionality is being removed from
> Performance. You used to be able to modify ecsets in Performance. Now
> you have to be in Expert to even change a value in the spreadsheet. You
> also can no longer audit ecsets in performance.
>
>
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Wednesday, April 18, 2007 1:19 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Relative prop delay
>
> Hi Gerry,
>
> Well, keep in mind, I've gotten XNETs to work in Performance ;-)
>
> Were you basing what you said on some documentation or experience?  If
> so,
> I'd like to know more.
>
> Regards,
>
> Austin
>
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Gerry Meier
> > Sent: Wednesday, April 18, 2007 2:00 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: Relative prop delay
> >
> >
> > Austin,
> >
> > Good luck - Let me know if you get it to work and get Constraint
> Manager
> > to actually calculate it.
> >
> >
> > Gerry
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
> Franklin
> > Sent: Wednesday, April 18, 2007 11:58 AM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: Relative prop delay
> >
> > Hi Gerry,
> >
> > > Pin delays can only be used in "Allegro Expert" and can be imported
> > > with a .CSV file.
> >
> > I have Performance, and when I use "Edit Property" and select a pin,
> one
> > of
> > the available properties is "Pin_Delay", and it lets me add it.  This
> > would
> > lead me to believe it works in Performance as well.
> >
> > Regards,
> >
> > Austin
> >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: