[PCB_FORUM] Re: Announcing the Transition of the ICU PCB Forum to CDNUSERS.ORG
- From: Michael.Catrambone@xxxxxxxxxx
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Tue, 7 Mar 2006 16:07:22 -0600
George,
That is not the case.. We have been working with the web team to iron this
out and currently this is how it works:
Subject: Shared code - SKILL > Create a .dra file with a custom
stackup from SKILL?
The above subject example states it is coming from the Shared code - SKILL
Forum
followed by the posted question "Create a .dra file with a custom stackup
from SKILL?"
PCB Design > Extra routing room by suppressing pads
The above subject example states it is coming from the PCB Design Forum
followed by the posted question "Extra routing room by suppressing pads"
This reformatting is something that has been cleaned in the last couple of
weeks but was formatted differently during the initial roll-out.
Mike
icu-pcb-forum-bounce@xxxxxxxxxxxxx@freelists.org on 03/07/2006 03:41:36 PM
Please respond to icu-pcb-forum@xxxxxxxxxxxxx
To: <icu-pcb-forum@xxxxxxxxxxxxx>
cc:
Subject: [PCB_FORUM] Re: Announcing the Transition of the ICU PCB Forum
to CDNUSERS.ORG
Mike:
Presently, if one is subscribed to multiple CDNUser forums (i.e. PCB
Design and Skill), there is no way of knowing which forum the email is
coming from. This makes it difficult to auto-filter it so it is placed
in the correct folder. There needs to be a way of discriminating email,
like this (and most) forums do: placing identifying text in the subject
line.
Just a suggestion :)
--
George Patrick
Tektronix, Inc.
Central Engineering, Engineering Design Services
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
http://www.tektronix.com http://www.pcb-designer.com
"Off-Grid and Proud of it!"
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Tuesday, March 07, 2006 12:41
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Announcing the Transition of the ICU PCB Forum
to CDNUSERS.ORG
> We have a request in the web team to look into the hard to
> read text on the web page and see what we can do... Personally,
> I do not have an issues with the web site and I have very bad
> vision as well but the web team is going to look into this.
I have had around 5 laser surgeries to my eyes to repair retinopathy,
which tends to make anything smaller than 10 or 11 points extremely
difficult for me to see. I can see the email without problems because I
can set the fonts large enough to see. I have to admit that they have
improved the site from the days when I originally complained. They used
to have gray on white text that was impossible for me to see, at least
it's black on gray, now. It's just unfortunate that they still have to
use 8 or 9 point type.
> I have a questions.. If we were able to get the CDNUSERS.ORG
forum
> such that you had the ability to monitor / post / reply directly
to
> the forum via email would that address most of everyone
> issues/concerns ?
If bidirectional email were available, I would stick around. The main
issue with me is visibility, followed by ease of use, followed by
content filtering because somebody wants no humor or personality on the
forum. The chemistry here has grown through more than just the propel
on it, it has grown due to the spontaneity of the medium. Without the
immediate response available with email, a lot of that "personality"
will be lost, and a lot of the reason to stick around will be lost, too.
Work is too stressful without the occasional bit of humor.
--
George Patrick
Tektronix, Inc.
Central Engineering, Engineering Design Services
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
http://www.tektronix.com http://www.pcb-designer.com
"Off-Grid and Proud of it!"
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
