[amayausers.com] Re: Cap Frames
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 26 Jun 2010 04:21:10 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/964/2.html#000017
You should be using backing, whether you think you need it or not.
You must also make sure the sewing area on the cap is parallel to the floor (or
needleplate).
You must also make sure the "bill stop" is not pushing too hard against the
bill.
You must not sew too high in the cap. The sewing field on the machine is 3.5"
but that may not be the sewing field on YOUR cap.
Just some thoughts.
But as Rod said, give us some more details.
Ed
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
