thanks for everything Jim. i guess i'll have to get one .the customer said he'd pay for it.i didn't have the fax on at that time.i don't leave it on because i'm not sure how it works yet. the help menu doesn't help much. i don't really use a fax that much but i would really like to figure this thing out. al marquardt ampm@xxxxxxx ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, May 06, 2002 11:20 AM Subject: [TechAssist] Re: TS2744 Chassis # 27B800 > > Al, I tried your fax again at around 9:50am CST, no answer. I also called > Philips tech line and they verified that you do have to have a remote with > either a "smart" button or a "vcr/clr" or "vcr/set" button, (one Philips > tech said vcr/clr and another said vcr/set) to save the vertical settings, > all other settings can be done with the customers remote. Guess you have no > choice but to get your hands on one, if I had one I'd ship it to you to use > and return, maybe someone else will make the same offer. > Jim Myers > Telrad Electronic Services Co. > Fort Wayne, IN 46815 > jr.myers@xxxxxxxxxxx > 260-432-4486 Fax and Voice > Fax is always on > ----- Original Message ----- > From: "Ron Purkhiser" <rpurkhiser@xxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, May 04, 2002 3:57 PM > Subject: [TechAssist] Re: TS2744 Chassis # 27B800 > > > > Al, I have the following for the B8: > > Service Mode, (B7, B8) > CTV's ----Must have remote with "smart" button > Use the remote to activate the service menu. Press 06 25 96, and menu > Use menu button to scroll thru pages A thru H of items to be adjusted. > Use channel up/down for adjusting. > > When finished, to save adjustments, press "smart", 9, Volume up. > Set should turn off. Unplug for a few minutes, then plug back in. > Everything done with the remote. > > Ron > Mailto:rpurkhiser@xxxxxxxxxx > Ron Purkhiser, Treasurer, NESDA of Ohio > Editor of the Speaker, Nesda of Ohio Newsletter > Enjoy the Speaker Online, www.nesda-ohio.com > Ron's Video Repair > 56 Oakhurst Dr. > Munroe Falls, OH 44262 > Phone and Fax. 330-688-6624 > > > > ----- Original Message ----- > From: "al m" <ampm@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, May 04, 2002 4:03 AM > Subject: [TechAssist] TS2744 Chassis # 27B800 > > > > > > can someone help me with this service adjustment. I go into service mode > and > > the first page comes up SA in top left corner RT:00 00 under it and under > > that i get > > bank :00 > > register:00 > > value: FF > > then when i push #2 on remote i get SB in top left corner and > > IF-PLL:42 > > push #3 SC in corner > > AGC:02 > > and so on.Can anyone explain how to adjust these parameters and how to > save > > them i don't understand what some of them are for, like Bank and Register > > and Value. these are default values as i reset the values as jim meyers > > explained.thanks Jim.problem is my vertical is compressed. when i go to > > height and vertical slope i can get picture to stretch to normal but i > can't > > save the settings this is what i need to know how to save the settings. > > original problem was no vertical. replaced supply resister, diode, and IC. > > then no raster no sound. after resetting eeprom picture is compressed,and > > have sound.No manual and i don't see many mags around here so i really > don't > > want to spend $50 for a disc.thanks for listening. > > al marquardt > > ampm@xxxxxxx > > > > > > > > > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/