I think you need the special remote to save the settings. Maybe someone else can supply you with the part number for this remote. geojohn --- al m <ampm@xxxxxxx> wrote: > > can someone help me with this service adjustment. I > go into service mode and > the first page comes up SA in top left corner RT:00 > 00 under it and under > that i get > bank :00 > register:00 > value: FF > then when i push #2 on remote i get SB in top left > corner and > IF-PLL:42 > push #3 SC in corner > AGC:02 > and so on.Can anyone explain how to adjust these > parameters and how to save > them i don't understand what some of them are for, > like Bank and Register > and Value. these are default values as i reset the > values as jim meyers > explained.thanks Jim.problem is my vertical is > compressed. when i go to > height and vertical slope i can get picture to > stretch to normal but i can't > save the settings this is what i need to know how to > save the settings. > original problem was no vertical. replaced supply > resister, diode, and IC. > then no raster no sound. after resetting eeprom > picture is compressed,and > have sound.No manual and i don't see many mags > around here so i really don't > want to spend $50 for a disc.thanks for listening. > al marquardt > ampm@xxxxxxx > > > > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ===== Johnson TV & Satellite Weatherly, PA 18255 570-427-4637 Voice & Fax __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/