[TechAssist] TS2744 Chassis # 27B800
- From: "al m" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 4 May 2002 04:03:05 -0400
can someone help me with this service adjustment. I go into service mode and
the first page comes up SA in top left corner RT:00 00 under it and under
that i get
bank :00
register:00
value: FF
then when i push #2 on remote i get SB in top left corner and
IF-PLL:42
push #3 SC in corner
AGC:02
and so on.Can anyone explain how to adjust these parameters and how to save
them i don't understand what some of them are for, like Bank and Register
and Value. these are default values as i reset the values as jim meyers
explained.thanks Jim.problem is my vertical is compressed. when i go to
height and vertical slope i can get picture to stretch to normal but i can't
save the settings this is what i need to know how to save the settings.
original problem was no vertical. replaced supply resister, diode, and IC.
then no raster no sound. after resetting eeprom picture is compressed,and
have sound.No manual and i don't see many mags around here so i really don't
want to spend $50 for a disc.thanks for listening.
al marquardt
ampm@xxxxxxx
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
