Part no 483521917656 you need --- Jim Myers <jr.myers@xxxxxxxxxxx> wrote: > > I have a Philips remote with a "Smart sound" and a > "Smart picture" button, > Philips tech line says this is not the same and > won't work. > Jim Myers > Telrad Electronic Services Co. > Fort Wayne, IN 46815 > jr.myers@xxxxxxxxxxx > 260-432-4486 Fax and Voice > Fax is always on > ----- Original Message ----- > From: <gulftech@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, May 06, 2002 1:34 PM > Subject: [TechAssist] Re: TS2744 Chassis # 27B800 > > > > Al, > > I just saw some Philips remotes at Electro Sound > (Philips-4, > 3139-228-81451) for $4.99 each. Has both "Smart > Sound" and "Smart > Picture" buttons. Electro Sound is 1-800-441-6110. > > A fax is a very useful tool. Needed a cabinet part > for a Panasonic > camcorder this morning. I don't have the manual and > would take a miracle > to describe it well enough for someone to send me > the right item. > Tritronics faxed me the parts breakdown page from > the area I needed. > Minutes later the right part was on the way. > > > Ken Smith > Gulf Technical Services > 3034 Gulf Breeze Parkway > Gulf Breeze, FL 32563 > 850-934-8324 (Voice) 850-932-0819 (Fax) > > > On Mon, 6 May 2002 12:10:58 -0400 "al m" > <ampm@xxxxxxx> writes: > > > > thanks for everything Jim. i guess i'll have to > get one .the > > customer said > > he'd pay for it.i didn't have the fax on at that > time.i don't leave > > it on > > because i'm not sure how it works yet. the help > menu doesn't help > > much. i > > don't really use a fax that much but i would > really like to figure > > this > > thing out. > > al marquardt > > ampm@xxxxxxx > > > > > > ----- Original Message ----- > > From: "Jim Myers" <jr.myers@xxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Monday, May 06, 2002 11:20 AM > > Subject: [TechAssist] Re: TS2744 Chassis # 27B800 > > > > > > > > > > Al, I tried your fax again at around 9:50am CST, > no answer. I also > > called > > > Philips tech line and they verified that you do > have to have a > > remote with > > > either a "smart" button or a "vcr/clr" or > "vcr/set" button, (one > > Philips > > > tech said vcr/clr and another said vcr/set) to > save the vertical > > settings, > > > all other settings can be done with the > customers remote. Guess > > you have > > no > > > choice but to get your hands on one, if I had > one I'd ship it to > > you to > > use > > > and return, maybe someone else will make the > same offer. > > > Jim Myers > > > Telrad Electronic Services Co. > > > Fort Wayne, IN 46815 > > > jr.myers@xxxxxxxxxxx > > > 260-432-4486 Fax and Voice > > > Fax is always on > > > ----- Original Message ----- > > > From: "Ron Purkhiser" <rpurkhiser@xxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Saturday, May 04, 2002 3:57 PM > > > Subject: [TechAssist] Re: TS2744 Chassis # > 27B800 > > > > > > > > > > > > Al, I have the following for the B8: > > > > > > Service Mode, (B7, B8) > > > CTV's ----Must have remote with "smart" button > > > Use the remote to activate the service menu. > Press 06 25 96, and > > menu > > > Use menu button to scroll thru pages A thru H of > items to be > > adjusted. > > > Use channel up/down for adjusting. > > > > > > When finished, to save adjustments, press > "smart", 9, Volume up. > > > Set should turn off. Unplug for a few minutes, > then plug back in. > > > Everything done with the remote. > > > > > > Ron > > > Mailto:rpurkhiser@xxxxxxxxxx > > > Ron Purkhiser, Treasurer, NESDA of Ohio > > > Editor of the Speaker, Nesda of Ohio Newsletter > > > Enjoy the Speaker Online, www.nesda-ohio.com > > > Ron's Video Repair > > > 56 Oakhurst Dr. > > > Munroe Falls, OH 44262 > > > Phone and Fax. 330-688-6624 > > > > > > > > > > > > ----- Original Message ----- > > > From: "al m" <ampm@xxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Saturday, May 04, 2002 4:03 AM > > > Subject: [TechAssist] TS2744 Chassis # 27B800 > > > > > > > > > > > > > > can someone help me with this service > adjustment. I go into > > service mode > > > and > > > > the first page comes up SA in top left corner > RT:00 00 under it > > and > > under > > > > that i get > > > > bank :00 > > > > register:00 > > > > value: FF > > > > then when i push #2 on remote i get SB in top > left corner and > > > > IF-PLL:42 > > > > push #3 SC in corner > > > > AGC:02 > > > > and so on.Can anyone explain how to adjust > these parameters and > > how to > > > save > > > > them i don't understand what some of them are > for, like Bank and > > Register > > > > and Value. these are default values as i reset > the values as jim > > meyers > > > > explained.thanks Jim.problem is my vertical is > compressed. when > > i go to > > > > height and vertical slope i can get picture to > stretch to normal > > but i > > > can't > > > > save the settings this is what i need to know > how to save the > > settings. > > > > original problem was no vertical. replaced > supply resister, > > diode, and > > IC. > > > > then no raster no sound. after resetting > eeprom picture is > > compressed,and > > > > have sound.No manual and i don't see many mags > around here so i > > really > > > don't > > > > want to spend $50 for a disc.thanks for > listening. > > > > al marquardt > > > > ampm@xxxxxxx > > > > > === message truncated === ===== IC Wyatt Wyatt's TV Sales & Service Phone: (252) 633-4436 Fax: (252) 633-4437 Email: wyattstv@xxxxxxxxx -- The Elite Since 1957 -- __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/