send your fax number.I have the CD ROM on this model.Will fax the service meny info.-Phil al m wrote: > > can someone help me with this service adjustment. I go into service mode and > the first page comes up SA in top left corner RT:00 00 under it and under > that i get > bank :00 > register:00 > value: FF > then when i push #2 on remote i get SB in top left corner and > IF-PLL:42 > push #3 SC in corner > AGC:02 > and so on.Can anyone explain how to adjust these parameters and how to save > them i don't understand what some of them are for, like Bank and Register > and Value. these are default values as i reset the values as jim meyers > explained.thanks Jim.problem is my vertical is compressed. when i go to > height and vertical slope i can get picture to stretch to normal but i can't > save the settings this is what i need to know how to save the settings. > original problem was no vertical. replaced supply resister, diode, and IC. > then no raster no sound. after resetting eeprom picture is compressed,and > have sound.No manual and i don't see many mags around here so i really don't > want to spend $50 for a disc.thanks for listening. > al marquardt > ampm@xxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ -- Philip Bader, Jan Phyl TV Inc. 3420 Recker Hwy,Winter Haven, Fl. 33880 voice/fax: 863-299-8821 Established 1976 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/