[TechAssist] Re: Networking question(off topic)...
- From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 15 Apr 2002 16:44:19 -0400
Ed,
I use a hub. I use Earthlink DSL which allow up to three IP addresses which mean
you can install there dial-up software, in this case WinPoet, on each PC. This
way, each PC can connect using the same modem that is connected to the HUB.
You can also purchase sharing software, in this case, the gateway computer needs
to be on the Internet for the second PC to be able to surf.
Not all ISp's allow more than one IP address to connect.
The info I gave with assigning IP addresses and gateway is ONLY so each computer
can recognize the other and share information.
Jeff
FAX 717-564-4952
Jeff Dougherty
Intrepid Video & Electronics
501 Luther Rd
Harrisburg, PA 17111
717-909-8844
VCR tips, electronics info & general interest.
www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
----- Original Message -----
From: "Tel-Tek Electronics" <teltek2@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, April 15, 2002 8:39 AM
Subject: [TechAssist] Re: Networking question(off topic)...
>
> Clint;
> Is this true for a Hub...too?
>
> -Ed-
> ----- Original Message -----
> From: <info@xxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Monday, April 15, 2002 4:37 AM
> Subject: [TechAssist] Re: Networking question(off topic)...
>
>
> >
> > FYI again (sorry), with a router the ISP doesn't know how
> > many PC's you have connected. All PC's over here have the
> > SAME IP address as seen in the LAN and as seen by websites
> > (and they are not the real IP's either). The actual IP
> > addresses are assigned by the router (VPN). This is another
> > thing that is great about a router. Again this could be ISP
> > dependent.
> > -Clint
> >
> > God Bless Us All
> > Clint Hamilton, Owner
> > http://OrpheusComputing.com
> > http://Computer-Hardware-Sales-Consumer-Electronics-Sales.com
> > sales@xxxxxxxxxxxxxxxxxxxx
> > Fax: 775-254-3030
> > TechAssist Administration
> > http://tech-assist.org
> > info@xxxxxxxxxxxxxxx
> > techassist@xxxxxxxxxxxxx
> > 4orpheus@xxxxxxxxxxxxx (alternates)
> > orpheuscomputing@xxxxxxxxxxxxxxxx
> > (PLEASE include our previous correspondence
> > if replying to this email!!)
> >
> >
> > ----- Original Message -----
> > From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Sunday, April 14, 2002 11:05 AM
> > Subject: [TechAssist] Re: Networking question(off topic)...
> >
> >
> >
> > Bil,
> > I do this with only a HUB, but earthlink allows for up to 3
> > IP addresses per
> > account.
> > I think you can still do this with other ISP's, but if they
> > catch you, I'm not
> > sure what they will do.
> >
> > Jeff
> >
> > FAX 717-564-4952
> > Jeff Dougherty
> > Intrepid Video & Electronics
> > 501 Luther Rd
> > Harrisburg, PA 17111
> > 717-909-8844
> > VCR tips, electronics info & general interest.
> > www.intrepid-video.com www.tech-repair.net
> > www.thetoolcaddy.com
> >
> >
> > ----- Original Message -----
> > From: "Bil Green" <tv.vcrrepair@xxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Cc: <res050hb@xxxxxxx>
> > Sent: Saturday, April 13, 2002 7:37 PM
> > Subject: [TechAssist] Re: Networking question(off topic)...
> >
> >
> > >
> > > I am about to hook two computers (Windows 2000 NTFS)
> > together also, but only
> > > to share
> > > the same DSL line (not networked together). I want to use
> > only 1 modem and
> > > have only one IP account. Is it possible to do this
> > without having to boot
> > > up more than one computer?
> > >
> > > Would like to have the capability to have both puters on
> > line at times, if
> > > too much trouble one is o.k.
> > >
> > > Thanks much,
> > >
> > > Bil
> > >
> > > ----- Original Message -----
> > > From: "Mark Simpson" <res050hb@xxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Saturday, April 13, 2002 3:55 PM
> > > Subject: [TechAssist] Re: Networking question(off topic)...
> > >
> > >
> > > >
> > > > Yes use crossover if not using hub.Use the network setup
> > wizard in
> > > xp,works
> > > > great.If you want to share internet and are on cable or
> > dsl,you will need
> > > > another lan card (for the computer connected to the
> > internet)and a hub.
> > > > Mark Simpson
> > > > Mark Electronics
> > > > 104 E. Dr. M.L.K. Jr,Blvd
> > > > Plant City,FL 33566
> > > > (813)717-9700
> > > > res050hb@xxxxxxx
> > > > ----- Original Message -----
> > > > From: "Terry H." <tvdoc@xxxxxxxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Saturday, April 13, 2002 6:37 PM
> > > > Subject: [TechAssist] Networking question(off topic)...
> > > >
> > > >
> > > > > Silly as it sounds, I've never networked two computers
> > before, and have
> > > > the chance to do so now. The one in the shop is older but
> > has Win.98 and
> > > > mine upstairs has XP. Before I start stringing Cat5 cable
> > everywhere, Is
> > > > there going to be a problem running the two together and
> > will I need a
> > > > crossover cable since I'm not using a hub? Thanks for any
> > input.
> > > > > Terry H.
> > > > >
> > > > > ------------------------------------------
> > > > > Make your TechAssist database better!
> > > > > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> > > > > ------------------------------------------
> > > > > To UNSUBSCRIBE your email address, click here:
> > > > >
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > Or send a BLANK email with unsubscribe in the
> > > > > SUBJECT field to the address above.
> > > > >
> > > > >
> > > >
> > > >
> > > > ------------------------------------------
> > > > Make your TechAssist database better!
> > > > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> > > > ------------------------------------------
> > > > To UNSUBSCRIBE your email address, click here:
> > > >
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > Or send a BLANK email with unsubscribe in the
> > > > SUBJECT field to the address above.
> > > >
> > >
> > > ------------------------------------------
> > > Make your TechAssist database better!
> > > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> > > ------------------------------------------
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > Or send a BLANK email with unsubscribe in the
> > > SUBJECT field to the address above.
> > >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
> >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
> >
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
