Peter, Very impressive sink, how did you get it made? Regards, Bill Earle www.wfephotography.com > Does anyone know why so many people have posted their experiences with > their > sink(s)? It seems like a lot of us are rather proud of our achievements > and > are keen to share this with others. I don't have much humility when it > comes > to bragging about my darkroom, in view of not breaking with that tradition > I'm happy to show off some photos of my custom made PVC sink. > The sink size is 1.8x0.75m with a 15cm splash back and three faucets > (H+C,C). The plumbing work sent my plumber into a bit of a spin because I > wanted to use flexible stainless steel braided supply lines (he didn't > think > they last very long from experience so tried to convince me to put in a > safety valve too). I also got him to use a flexible waste connection - > since > I wanted to be able to raise and lower the height after it was installed. > He > used double check non-return valves to avoid back flow, in case if someone > turned off the water at the mains while one of my sink taps was turned on > and the clear PVC tubing was resting in a pool of tasty chemicals. > anyway, here are the images labelled sink#1 to sink#6 > <ftp://ftp.users.on.net/images/> > http://www.users.on.net/~tallowood/images/ > So if you can afford it, my suggestion is to have a custom PVC sink > made! > regards > Peter > P.S. > The prototype version my ventilation system - can be seen as it is being > fine tuned in one of the photos. I blow a sheet of air across the trays to > be collected by the exhaust tube - thus stopping any chemical vapours from > reaching my nose - leaving my darkroom smelling "as fresh as a daisy". > Positive pressure is provided by an A/C inlet not shown in the photos. > ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.