[pure-silver] Re: Darkrooms
- From: Martin Jangowski <martin@xxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Sun, 1 Jun 2008 23:18:52 +0200 (CEST)
On Sun, 1 Jun 2008, Bogdan Karasek wrote:
Hi,
I thought it was obvious, but I meant how do you keep the top and bottom
edges of the paper flat?
Bogdan
I had excellent result with a piece of MDF board cut to size (19mm thick)
and sprayed with blue 3M spray adhesive. There are two types, red and
blue, red is permanent and blue is just sticky. I spray the board evenly
with the blue adhesive, it will stay sticky for a few weeks (depending on
usage). Even thick fiber paper will stick to the board and stays flat.
Correct positioning of the whole setup under the red filter. The paper
peels off without difficulty.
I thried tape with two sticky sides first (one side uses a strong adhesive
and the other side is just sticky), but the stuff is expensive and stops
working soon, so I switched to the 3M spray.
Grüße aus Hohenlohe,
Martin Jangowski
| Martin Jangowski E-Mail: Martin@xxxxxxxxxxxx|
| Netzwerke und Multimedia |
| Voice: +49 7946/3723 Fax: +49 7946/940791 |
| Snail Mail: Von-Olnhausen Str. 4 74626 Bretzfeld Germany |
Other related posts:
