In message <f67beeb651.dougjwebb@xxxxxxxxxxxxxx> Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote: > In message <181d64b651.GrahameParish@xxxxxxxxxxxxxx> > Grahame Parish <grahame.parish@xxxxxxxxxxxxxxx> wrote: > [snip] >> >> Just got to decide whether to replace the card or carry on with the >> Beagle xM, which has been working very well with only one reboot for >> two weeks now (it doesn't seem to like GPrint2 and hangs during >> printing) running OPro, Messenger, SparkFS, NetFetch, Organiser, >> Sunfish (needs alignment exceptions turned off to start it, but OK >> once running), RDPClient, StrongEd, NetSurf, PrivateEye and 7Backup. >> It's all working at 1600*1000x16M @ 45Hz, so I'm missing much that I >> could do on the Iyonix. Decisions... > Grahame > I'm interested in your statement above for a couple of reason in that > I have a Beagleboard -Xm and can't get it to work at 1680*1050 with my > monitor so your MDF file may be of use to me to check and experiment > with. > Also I have MessengerPro 6.01 working in IMAP client mode on the > Beagleboard but I get occasional crashes and also it will not start up > without alignment exceptions being switched off. Again interested in > how you are using MessengerPro and what version. > Perhaps we ought to not clog up this list though with any > correspondance as this is for Iyonix support so perhaps send me an > email? > Doug Replied by email, but I can copy the answer here if anyone else is interested. -- Grahame Parish grahame.parish@xxxxxxxxxxxxxxx --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx