Thanks Austin, You're correct - that's the bounding box (shows the extents of the symbol) and it's only displayed in the Component Browser and PCB Librarian. When you add the part in DEHDL, you won't see this. I don't believe there's any option to hide this in the Component Browser. Jerry -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of allegrolist@xxxxxxxxxxxx Sent: Friday, March 25, 2011 3:20 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Allegro Design Entry HDL (ConceptHDL) questions... Hi, Here is the picture of the dashed yellow box that shows up in the view or add component. It appears to be a "bounding box". In DxDesigner, there is a way to change this easily. I can't find a way in ADE... Thank you all for the help! Austin -------------------------------------------------------------------- mail2web - Check your email from the web at http://link.mail2web.com/mail2web ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------