[PCB_FORUM] Re: Allegro Design Entry HDL (ConceptHDL) questions...
- From: "allegrolist@xxxxxxxxxxxx" <allegrolist@xxxxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Fri, 25 Mar 2011 21:35:45 -0400
Hi Shriley,
I did figure out that the "CDS_LMAN_SYM_OUTLINE" was what this was. I
edited by hand to be correct. But there really should be a way to make
this visible and edit it in the part viewer I would believe.
> To remove your "yellow box" place the component on the schematic; then
> use the Descend arrow on the tool bar and click the component. This will
> put you into a view of the internal part of the component.
> The yellow box can then be deleted.
The yellow box isn't visible when I do this...
> At the same time while descended, you can use the Attributes box
> at the top to make the properties invisible.
Where is this "Attribuges" box at the top?
> If you find you have text shown in orange on a component on the
> schematic, that usually means that there is no corresponding Property
> definition in the symbol.css file that matches a header in the KEY
> property field in the part.ptf file. The Key properties are those
> that appear to the LEFT of the = sign.
Ah! I was wondering how it determined key and not key...thanks!
Please let me know if you have any questions.
So far, with this help, I'm doing OK...I have been able to make the updates
I wanted, and package the design. I have spent a lot of time figuring out
the two text files (chips and part), and doing some editing to the symbol
file...though I don't understand it all, I'm making headway.
Thank you again!
Austin
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://link.mail2web.com/mail2web
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
