[PCB_FORUM] Re: Allegro Design Entry HDL (ConceptHDL) questions...
- From: Jerry Grzenia <geraldg@xxxxxxxxxxx>
- To: "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>, "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 24 Mar 2011 19:06:10 -0700
Glad to help.
Any chance you can post a screenshot of the yellow box?
You would type display invisible and then LMB click on the PATH property.
Try and avoid using the Section command to display pin numbers as it limits
automatic swapping in the PCB. Rather, just let backannotation add them.
Regards,
Jerry Grzenia
-----Original Message-----
From: allegrolist@xxxxxxxxxxxx [mailto:allegrolist@xxxxxxxxxxxx]
Sent: Thursday, March 24, 2011 05:56 PM Pacific Standard Time
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro Design Entry HDL (ConceptHDL)
questions...
Hi Jerry,
> For the large yellow box, edit the symbol in DEHDL and remove those lines.
I did file/open and opened the symbol. I can't see the yellow box, so I
can't remove it.
> The pin numbers will appear on the pin stubs when you back annotate the
> schematic. Or, use the SECTION command and click on a pin stub - the pin
> numbers will appear.
Section worked to make the pin numbers visible. So, any time I place a
component, the pin numbers aren't visible?
> To "remove" the instance property - use the Display invisible command
> and click on this Path/instance property.
I'm on 15.7 if that matters. I don't find a display/invisible selection.
> Or, you can type in the DEHDL
> console window -
> Find Path
> Display invisible 'A'
I'll try that...and that worked.
> Or, better yet, on the symbol view itself, add a $PATH=?
> property and display it invisible.
> Anytime the part is added, the instance value will be invisible.
OK, I figured out how to add a property! Select what I'm guessing is the
origin (little "x" in the middle of the symbol), right click, select
attributes and that brings up a table I can edie/add.
> Hope this helps.
Very much so, thank you!
Best Regards,
Austin
--------------------------------------------------------------------
mail2web.com – Enhanced email for the mobile individual based on Microsoft®
Exchange - http://link.mail2web.com/Personal/EnhancedEmail
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
N�.n�+����{.n�+���zwZ��,j��'.��ߢ�����z�_�祊�l��0��Z���y�h~˛���m�+�{.n�+��������^j�!�����a��b��(��m����
�祊�l��?j�!����'.��ߢ�����nW���й�-���I��jw�j)m�'.��ߢ��i٢���y�b��(�
Other related posts:
