Does it stay visible after it is placed on the schematic? If it doesn't then it is a moot point. If it does then you may have to descend down into the component and replace the body lines. Please let me know if you have any questions. Shirley It is a PRIVILEGE to be born Free It is a RIGHT to live Free It is a DUTY to die Free -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of allegrolist@xxxxxxxxxxxx Sent: Thursday, March 24, 2011 8:01 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Allegro Design Entry HDL (ConceptHDL) questions... Hi Shirley, > To remove your "yellow box" place the component on the schematic; > then use the Descend arrow on the tool bar and click the component. > This will put you into a view of the internal part of the component. > The yellow box can then be deleted. No yellow box. It only shows up in the "add component" or "replace component" window. I'll do a screen shot in the morning. Thanks, Austin -------------------------------------------------------------------- mail2web.com - What can On Demand Business Solutions do for you? http://link.mail2web.com/Business/SharePoint ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------