Re: [foxboro] Upgrading Foxboro AW from P91, (Dell 2800), to P91,(Dell 2900), 2003 Server

  • From: "tjvandew@xxxxxxxxx" <tjvandew@xxxxxxxxx>
  • To: foxboro@xxxxxxxxxxxxx
  • Date: Wed, 11 Feb 2009 21:00:45 -1000

Ron,
    I thought you would be the first to reply to my post to the list.  I 
am not claiming victory yet but we were able to do a backup of the 
C:(Windows), and D: (IA), partitions on a Dell 2800 P91 with a single 
hard drive that was running Bios 1.5.0 and have restored it to a new  
Dell 2900 P91 with a Raid 1 with dual hard drives running Bios 2.5.0 or 
something like that.  We used a trial download version of Symantec 
Backup and Restore Ver.8.5.  Rather than backing up the whole hard drive 
in one combined image we backed up the C: and D: partitions separately 
and restored them separately to allow us to utilize different restore 
options that come with Symantec Ver.8.5 restore for each partition.  We 
backed up to a USB hard drive on the 2800 and then connected that USB 
drive to the new 2900 for the restore. 
    The new Symantec restore boot CD has a "Restore Anywhere" feature 
that can be invoked during the restore setup and is supposed to be 
designed to load without transferring all of the machine hardware 
specific files/drivers.  On initial boot we let it try to boot all the 
way up but it hung during the boot and finally bailed and rebooted 
before it completed to boot up.  We decided to boot in the Safe Mode 
without networking and we were able to get it to re-establish all of the 
plug and play drivers.  Next we booted into the Safe Mode with 
Networking and took care of the network adapters.  It shows a mini port 
driver error and didn't correctly identify the Fiber NIC's as Allied 
Telesyns but it was happy enough to reboot with no complaints except the 
mini port. 
    Tomorrow I plan to delete the Fiber NIC's and then re-install the 
drivers for the Allied Telesysn's.  I will also delete the mini port and 
then do a Day 0/1 on the box to see if it correctly binds.  All of the 
applications and data files from the old 2800 are now on the C: and D: 
partitions of the new 2900, so if this works and the fiber NIC's and 
Mini port correctly re-install I think we have a shot at getting this 
done without doing all of the specific application reloads and database 
saves that you struggled through.  We decided not to pull the fiber 
NIC's out of the old box because it is used for too many things to leave 
it down while we play with it's replacement.
    I am not claiming victory yet but there is definitely hope for 
success.  I will let everyone know if we are successful.
    Included below is information about Ver.8.5 Symantec.  It is worth a 
watch to understand what it seems to do.

Cheers,
Tom VandeWater
Control Conversions, Inc.
Kapolei, HI

> http://www.symantec.com/business/backup-exec-system-recovery-desktop-edition#
>
> I advise anyone interested to watch the animated tour by picking "View
> Tour" on the web page.  If the Norton hype is correct this is what they
> say it can do:
>
> Symantec Backup Exec(tm) System Recovery 8.5 restores complete Windows
> systems in minutes, even to dissimilar hardware or virtual
> environments, with new functionality to automate physical to virtual
> conversions for immediate system recovery.  Additional capabilities
> include flexible offsite protection; Exchange, SharePoint and
> file/folder recovery, and support for all Windows Server 2008
> environments.
>
> Key Features:
> Dissimilar hardware restoration with Restore Anyware(tm) technology -
> Restore 'hot' system images to different hardware platforms on the
> fly.
> Comprehensive virtual conversion capabilities - Easily convert
> physical to virtual environments, as well as automate physical to
> virtual conversions for immediate system recovery
> Offsite backup copy - Copy recovery points to FTP location or
> secondary disk drive for offsite disaster recovery capabilities and/or
> long-term archival
> Granular recovery of Exchange, SharePoint or files and folders from a
> single, multi-tab interface (via the Granular Restore Option)
>
>
> Operating Systems for the Server Edition:
> Windows 32-bit or 64-bit operating systems:
> Windows 2000 Server (SP4 or later)
> Windows 2000 Advanced Server (SP4 or later)
> Windows Server 2003
> Windows Server 2008 including SP 1
> Windows Essential Business Server 2008
>
> Cheers,
> Tom VandeWater
> Control Conversions, Inc.
> Kapolei, HI



Ron Schafer wrote:
> Well it seems that while I have been gone to tend to the ferrets and chickens 
> a topic of great pain for myself has been hashed around. I can verify to all 
> as first hand information that a P91-2800 to p91-2900 will restore just fine. 
> The problem will surface when you reboot and all you get is the familiar 
> "BLUE SCREEN OF DEATH". We just shipped back a 2800 after spending many weeks 
> getting the 2900 up to speed. (sorry Fox for not returning it sooner...) Yes 
> the pain was felt with the Day 0 and many installs and reboots as it too was 
> the boot host and RDP server and backup OPC server and Foxray server and and 
> and and the list goes on....and on...and on.
> So for those about to try it, I did a ghost backup(of each partition to keep 
> the filesize smaller) to a extra HD on the 2800, rebooted into windows, and 
> copied them off to an extra harddrive on the 2900. This allowed for a image 
> that we can pull files from in the future if we need to and its on a local 
> drive to the 2900. Yes we had to Day 0 the machine, however doing a Restore 
> of the D partition did work. However, I was very carefull to make sure no ICC 
> changes were made between the removal of the 2800 and installation of the 
> 2900 as that would lead to corrupt workfiles, or so I am told. Also, we did 
> swap ethernet cards just for the sake of the mac address issue. We have 
> recently upgraded to 8.4.2 and continue to run without issues of major 
> concern. This was a fairly painless procedure once we gave up on the total 
> ghost restore idea and followed some basic rules. 
>  
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:             //www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>  
>
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  1. Home
  2. foxboro
  3. Archive
  4. 02-2009