Re: [foxboro] Upgrading Foxboro AW from P91, (Dell 2800), to P91,(Dell 2900), 2003 Server

  • From: "Larsen, Ed" <ed.larsen@xxxxxxxxxxxxxxxx>
  • To: <foxboro@xxxxxxxxxxxxx>
  • Date: Sun, 15 Feb 2009 16:20:47 -0500

One of the things was the AIM* code. I am an employee, so my access is a
little different. For me it is under Support --> Foxboro --> Aim Temp
Authorization. Aim* Regenerator is there also, but I have to VPN into
our network to get to it. :(

Bracing for the 20 out of office autoreplies. :)




-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of tjvandew@xxxxxxxxx
Sent: Sunday, February 15, 2009 1:55 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Upgrading Foxboro AW from P91, (Dell 2800), to
P91,(Dell 2900), 2003 Server

Jack,
    Thanks for the feedback about being able to do a full restore to 
same vintage hardware. We haven't tested that yet but that was our hope 
in buying two identical P91 2900's for this critical box.  We had an 
underpowered 2800 with a single hard drive that was one of a kind and we

were afraid that we would not be able to recover to another box in a 
timely fashion if it failed.  When you restore to the same vintage I 
assume you must take the Allied Telesys fiber NIC's out of the old box 
and put them in the new box to make it work without any further 
modifications.  Is that correct?
    You are absolutely right that the hostid, (ASCII string), cannot be 
found in any file on the hard drive.  We did a search of all files for 
the string which was something like "4460fbe1" and came up empty 
handed.  The AIM API Admin must interpret it from some other source for 
display in that application window based on DAY0 install information??
    Alex, we are interested to know if we, as users, can get to the "AIM

Temp Code" pick on the website.  Maybe that is what Ed Larsen was 
responding to in his garbled message earlier.

Regards,
Tom VandeWater

Jack.Easley@xxxxxxxxxxxx wrote:
> Tom,
>
> You can do a Symantec restore to a spare hardware of the same vintage.
I
> have done this with a P92. So if you have duplicate hardware you
bought
> at the same time as the original, you can use it to do a Symantec
> restore without a Day 0 install. I don't even think AIM re-licensing
> will be required, but haven't restored a box with AIM yet (except to
> same box).
>
> I think the AIM re-generator Alex refers to allows you to enter your
old
> hostid and AIM license code to get a new AIM license code. The tricky
> part is that you must have your old hostid written down somewhere, as
> the only place I know to find it is in apiadmin on your original
> install. I don't think you'll find hostid in any files on your backup.
> Somebody correct me if I'm wrong on this.
>
> Alex,
> I don't find an "AIM Temp Code" pick under Support-Foxboro on
> http://support.ips.invensys.com/. I know I saw this at AIM training
> class, at least the part about requesting an AIM temporary license
> online. Are regular customers blocked from Aim Temp Codes?
>
> Thanks,
>
> Jack Easley
> Sr. I&C Technician
> Luminant Power, Martin Lake Plant
> Phone 903.836.6241
> jack.easley@xxxxxxxxxxxx
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of tjvandew@xxxxxxxxx
> Sent: Sunday, February 15, 2009 12:01 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] Upgrading Foxboro AW from P91, (Dell 2800), to
> P91,(Dell 2900), 2003 Server
>
> Thanks Alex.  That is good news.  We bought a backup box to insure we
> would always be able to recover this critical server rapidly but since
a
> backup from one box and restore to a new one is not possible using
> Symantec, you must do a Day0/Day1 on the new box in order to use it.
> This generates the new hostid  that requires new authorization codes
be
> obtained.  I wasn't privy to the existence of the temporary auth codes
> and evidently neither was my Foxboro contact. You mentioned a code
> re-generator. How can I find and download that?  
> Thanks for your help. 
> Tom VandeWater
> Sent from my Verizon Wireless BlackBerry
> -----Original Message-----
> From: "Johnson, Alex P (IPS)" <alex.johnson@xxxxxxxxxxxxxxxx>
>
> Date: Sun, 15 Feb 2009 09:22:03 
> To: <foxboro@xxxxxxxxxxxxx>
> Subject: Re: [foxboro] Upgrading Foxboro AW from P91, (Dell 2800), to
> P91,(Dell 2900), 2003 Server
>
>
> Re: AIM*AT Authorization
>
> Tom,
>
> It doesn't have to be awful.
>
> You can get a temporary code by going to the GCS website
> (http://support.ips.invensys.com), clicking on Support, clicking
> Foxboro, and choosing the AIM Temp Code pick.
>
> It will allow AIM*AT to run until the machine is rebooted or 90 days
> whichever is longer.
>
> Once you have your new codes, edit the file /opt/aim/bin/an_init.tcp
and
> enter the new codes into it. It's pretty obvious what to change. I
never
> use the GUI.
>
>
> There's also an AIM*AT Code Regenerator, but I've never used it.
>
>
>
> Regards,
>  
> Alex Johnson
> Invensys Process Systems
> 10900 Equity Drive
> Houston, TX 77041
> 713 329 8472 (desk)
> 713 329 1600 (operator)
> 713 329 1944 (SSC Fax)
> 713 329 1700 (Central Fax)
> alex.johnson@xxxxxxxxxxxxxxxx
>
>
> Confidentiality Notice: This email message, including any attachments,

> contains or may contain confidential information intended only for the

> addressee. If you are not an intended recipient of this message, be 
> advised that any reading, dissemination, forwarding, printing, copying
> or other use of this message or its attachments is strictly
prohibited. If
> you have received this message in error, please notify the sender 
> immediately by reply message and delete this email message and any
> attachments from your system. 
>  
>  
>
_______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys
Process
> Systems (formerly The Foxboro Company). Use the info you obtain here
at
> your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:
//www.freelists.org/list/foxboro
> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>  
>
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


* Confidentiality Notice:
This e-mail and any associated files are intended solely for the individual or 
entity to whom they are addressed. Please do not copy it or use it for any 
purposes, or disclose its contents to any other person. Further, this e-mail 
and any associated files may be confidential and further may be legally 
privileged. This email is from the Invensys Process Systems business unit of 
Invensys plc which is a company registered in England and Wales with its 
registered office at Portland House, Bressenden Place, London, SW1E 5BF 
(Registered number 166023).  For a list of European legal entities within the 
Invensys Process Systems business group, please click here 
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.

If you have received this e-mail in error, you are on notice of its status. 
Please notify us immediately by reply e-mail and then delete this message from 
your system. Thank you for your co-operation. You may contact our Helpdesk on 
+44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail 
and any attachments thereto may be subject to the terms of any agreements 
between Invensys (and/or its subsidiaries and affiliates) and the recipient 
(and/or its subsidiaries and affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  1. Home
  2. foxboro
  3. Archive
  4. 02-2009