On 19 Nov, Ian Hamilton <Ian.Hamilton@xxxxxxxx> wrote: > In article <4f44160a4aphilco@xxxxxxxxxxx>, Phil <philco@xxxxxxxxxxx> > wrote: > > I have not used Sprinter and now I have tried it, I think I should > > have a long time ago, having had it on the computer for a long I'd > > forgotten what it actually did, much to my shame. > [Snip] > > Running RO4.39, !Printers+ 1.91a. > > Ive installed Sprinter following the instructions, placing PDumperSP > > in the PDumpers directory and installing the definition file SPrinter > > into !Printers and setting the connection and config etc then saving. > > Running Sprinter works fine. However, when I come to restart the > > machine, I get an Error at class dp message, clicking ok continues > > the boot up and !Printers installs ok, but the Sprinter icon is a > > default printer icon. Running Sprinter and selecting Sprinter as the > > output works ok though. > [Snip] > Most likely there is a misalignment between the setup files in the > Printers Choices directory (I think Printers+ uses Printers2 so you > need to look at !Boot.Choices.Printers2). My advice is to move this > directory elsewhere and setup all your printers from scratch. Hopefully > it will then work correctly. > Ian Just tried reinstalling printers from scratch and I still get the error box. Printers consists of UNIPRINT (to a HP2355), Arcfax, Sprinter. Loaded in various orders too. Defualt printer is Uniprint. Thanks Phil -- philco@xxxxxxxxxxx